← Build stories

Classic exhaust fabrication

Jaguar E-Type: stainless exhaust link-pipe fabrication

Jaguar E-Type

A focused fabrication job on a distinctive classic: making the exhaust connections fit the car’s existing layout, with workshop photographs showing the work from disconnected pipes to fitted sections.

See the workshop photos ↓
Fabricated twin exhaust link pipes beneath a Jaguar E-Type
The fitted link-pipe route between the existing manifold outlets and centre exhaust sections.
01Jaguar E-Type
02304 stainless fabrication
03TIG-welded link pipes
04Original process photographs
01

A specific fabrication brief

The completed workshop job was to fabricate link pipes between the exhaust manifolds and centre boxes. The scope was these connecting sections, rather than a full vehicle restoration or a complete exhaust replacement. The existing car and its wider specification are shown only as context for that work.

02

Working around the existing layout

The photographs show the available route around the sump and adjacent chassis structure. A link pipe needs to meet the existing connection points while following a suitable path through that space. This is where fabrication differs from simply fitting a model-specific replacement section.

03

From fitting work to welding

The archive includes disconnected pipes, welding beneath the vehicle and a shaped section on the bench. The paid job identifies TIG-welded 304 stainless steel fabrication. These process photographs make the work visible, rather than relying solely on an exterior picture of the finished car.

04

The fitted connections

The final underbody views show the twin link-pipe arrangement and its connections to the retained exhaust hardware. The story documents the recorded fabrication; it does not claim a measured power increase, a sound measurement or work on the rest of the vehicle.

05

Bring us the fitting problem

If an existing classic or modified-car exhaust needs a connecting section, tell us what is already fitted and what needs to join together. Photographs can help the initial discussion, with the vehicle and connection points assessed before the fabrication scope is agreed.

The work behind the story

Inside the workshop.

Original December 2024 process photographs, including the disconnected arrangement, fabrication work and fitted link pipes. Click any image to enlarge it.

Fabricated twin exhaust link pipes beneath a Jaguar E-Type
The fitted link-pipe route between the existing manifold outlets and centre exhaust sections.
Open manifold connections and detached exhaust sections beneath the E-Type
Before fabrication: the disconnected sections photographed on 15 December 2024.
Fabricator welding the E-Type exhaust beneath the car
Welding work in progress on 19 December 2024.
Shaped stainless exhaust link pipe held in a workshop vice
A fabricated link-pipe section on the bench during the December job.
Close-up of an E-Type exhaust connection and retaining springs
Connection detail where the fabricated pipe meets the existing exhaust hardware.
Torque Monsta plate on the E-Type stainless exhaust pipe
A detail of the completed fabrication on 20 December 2024.

Explore your options

The services behind this story.

Powerflow custom exhaustsDiscuss your project

Something similar in mind?

Tell us about your vehicle and what you need. We will discuss the assessment, compatibility and agreed scope for your own project.

Talk to the team →