The complete service directory.

Additional oil-pressure, oil-temperature and fuel-pressure monitoring

Track battery isolation switches

Compatible lightweight battery installation

Battery chemistry, charging, protection and mounting compatibility checked.

Data logger/lap timer and sensor installation

Shift-light installation and configuration

Turbo inlet, outlet and charge-pipe kits

Charge-cooler pumps and heat-exchanger upgrades

Supported flex-fuel sensor installation/integration

Vehicle-specific feasibility and calibration required.

Water/methanol injection and failsafe integration

Application and failsafe strategy agreed before installation.

Air intakes, induction kits and performance filters

Compatible vehicle-specific kits preferred.

Intercooler, radiator, oil-cooler and catch-can upgrades

Supporting hardware matched to the build.

Fuel pumps, injectors and ethanol-compatible builds

Vehicle-specific hardware and calibration feasibility.

Suitable turbo muffler-delete hardware fitting

Turbo intake hardware only; emissions equipment remains operational.

Throttle inlet pipe and supported throttle-body upgrade kits

Uprated radiator and intercooler hose kits

Oil thermostat and thermostatic sandwich-plate installation

Vehicle-specific gearbox and differential cooling kits

Fuel pressure and delivery validation

Appropriate operating conditions and safe test method agreed; no dyno service.

Modified-vehicle charge temperature and heat-soak investigation

Suitable exchange/remanufactured unit sourcing

Suitable remanufactured/exchange component sourced against the vehicle specification.

Old-unit surcharge and core-return arrangements

Applicable surcharge, returned-unit condition and return terms explained before ordering.

Apple CarPlay and Android Auto retrofit kits

Aftermarket head units with compatible factory controls

Speaker, amplifier and subwoofer upgrades

Door/cabin sound-deadening installation

Front/rear parking-sensor retrofits

Reversing-camera retrofits, including vans

Supported VAG non-adaptive cruise-control retrofits

VAG only, supported non-adaptive systems; no ADAS calibration.

USB-C, auxiliary sockets and accessory power

Dash cam supply and fitting

Suitable camera, mounting, wiring and power protection agreed.

Audio amplifier gain and crossover setup

Supported reversing-camera alignment and parking guideline setup

Where the vehicle and fitted camera support adjustment/configuration.

Alloy wheel refurbishment arrangements

Arranged service; no wheel straightening.

Bodywork, paintwork and paintless dent repair arrangements

Scope and arrangements confirmed before booking.

Third-party recovery arrangements

We do not undertake recovery. Call before delivery; acceptance depends on capacity and job suitability.

Customer-supplied parts fitting

Agreed conditions, suitability and labour charges apply; statutory rights preserved.

Customer-authorised communication with another garage

With the customer’s authorisation and the relevant findings agreed for sharing.

Photographic additional-work approval requests

Where practical; telephone remains the normal update and approval channel.

Vehicle-specific preventative upgrades before tuning

Return-to-standard work on modified vehicles

Hardware and supported calibration feasibility assessed.

Paid modification compatibility assessments

Chargeable and separate from installation.

Forged engine and performance gearbox build projects

Specialist build arrangements, assessed per project; not a general in-house rebuild claim.

Full multi-stage build project management

Hardware, calibration, budget, sequence and records agreed.

Written staged-upgrade plans

Dependencies, maintenance needs, budget and installation sequence explained.

Car club servicing and individually booked workshop appointments

Individually booked appointments by agreement. Torque Monsta sponsors Hybrid Performance and works with Lee and his admin team on member perks. AQOUK members are welcome; other car club enquiries invited.

Off-the-shelf aftermarket exhaust supply and fitting

Vehicle-specific catalogue systems; not every brand listed in the shop is an exhaust brand.

Hot exhaust clearance and contact investigation

Exhaust valve and actuator repair/replacement

Compatible OEM exhaust-valve integration

Exhaust drone investigation and resonator/silencer changes

Repair of existing custom exhausts

Suitable exhaust flexi-section replacement

Exhaust hangers, brackets and heat shields

Suitable removable track silencers

Exhaust tip replacement

Replacement tips only, not refinishing.

Custom Powerflow exhausts and free 15-minute assessment

Assessment required before a custom quotation.

Short shifters and shift-linkage bushes

Uprated engine/gearbox mounts and dogbone inserts

Suitable single-mass flywheel conversions

Vehicle suitability and refinement compromises explained.

Limited-slip differential supply and fitting

Application, lubricant and setup requirements assessed.

Application-specific performance clutch hydraulic upgrades

Gearbox mount and shifter alignment after upgrades

Headlamp lens restoration and protective finish

Headlamp aim checking and adjustment

Complete headlamp and rear-lamp replacement

Mirror glass, assemblies and power-fold mechanisms

Registered supply of compliant replacement number plates

Required identity and entitlement documents must be checked.

Fitting compliant customer-supplied number plates

Horn, relay and wiring repair

ECU remapping and bespoke supported calibration

Vehicle health, hardware, fuel and intended use assessed; no guaranteed power figure.

TCU/DSG tuning and authorised xHP installation

Supported vehicle/gearbox applications; not automatic gearbox rebuilding.

Live data logging and calibration development

No dyno power-run service.

Existing performance hardware identification before tuning

Aftermarket sensor scaling and calibration compatibility checks

Supported ECU, sensor and hardware combination must be verified.

Existing calibration and hardware compatibility review

Supported factory ECUs only; access to every locked ECU cannot be promised.

Supported road drivability calibration refinement

Only where a supported calibration permits the agreed refinement.

Splitter, spoiler and diffuser fitting/correction

Carbon bonnet/boot-lid fitting and retention

Suitable latch/retention and vehicle compatibility required.

Suitable baffled sump installation

Ignition plugs, coils and supporting upgrades

Chosen to suit the engine and calibration.

Dry-sump conversion installation using a complete engineered kit

Vehicle-specific feasibility, complete kit, mounting, plumbing and clearance assessed before acceptance.

Interior trim, glovebox and console mechanism repairs

Mechanisms/trim only; no upholstery.

Spare-wheel carrier and lowering-mechanism repairs

Performance filter cleaning/re-oiling to manufacturer guidance

Coilover cleaning and adjustment-collar maintenance

Rebuildable damper removal/refitting for appropriate servicing

Removal/refitting and suitable servicing arrangements; not in-house internal damper rebuilding.

Adjustable suspension/rose-joint inspection and replacement

Catch-can draining, inspection and hose maintenance

Water/methanol maintenance and failsafe checks

Supercharger belt-slip and pulley-alignment checks

Agreed post-installation inspections

Interval agreed for the particular installation.

Tailored tuned-car maintenance schedules

Documented modification and installation records

Existing workshop records; copies by agreement, not automated downloads or insurance certification.

Fault investigation on vehicles modified elsewhere

Work on existing modifications accepted after assessment; no requirement to buy a new package.

Agreed post-installation boost leak pressure testing

Crankcase pressure and oil carry-over investigation

Installed equipment operation and maintenance handover

Provided when required or requested for the installed equipment.

Brake cooling duct kits

Two-piece brake disc assembly/replacement

Track-pad and return-to-road pad changes

Cosmetic brake-caliper refinishing

Brake master cylinder upgrades within compatible engineered packages

Brake pedal feel and hydraulic compatibility assessment

Performance brakes, suspension, wheels and tyres

Complete-package fitment and suitability checks.

Body kits, aero, interior and lighting upgrades

Vehicle/component suitability and road-use requirements assessed.

Heat shielding, turbo blankets and thermal protection installation

Component-maker requirements, temperatures and surrounding clearances checked.

Engine bay hose, loom and pipe clearance work after hardware upgrades

Auxiliary belts, tensioners, idlers and alternator pulleys

Coilover ride-height setup and clearance checks

Adjustable camber arms and top mounts

Subframe alignment and suitable inserts/locking kits

Adjustable anti-roll bars and drop links

Strut braces and bolt-on chassis reinforcement

Suspension travel and bump-stop clearance assessment after lowering

Adjustable suspension baseline settings recorded at handover

Suitable motorsport extinguisher/plumbed-system installation

Suitable applications only; no blanket motorsport certification.

Indicative track-event noise assessment

Indicative only; circuit methods vary and passing is not guaranteed.

Agreed road/track setup changes

Agreed ride height, damping and alignment; no corner weighting.

Road/track geometry and track-day preparation

No corner weighting; preparation does not certify event eligibility.

Roll cages, motorsport seats and harnesses

Compatible mounting, use and safety requirements assessed.

Supercharger pulley and belt upgrades

Supported vehicle/application and hardware checked before booking.

Supercharger servicing

Vehicle-specific turbo upgrade kit installation

Recirculation/diverter valve upgrades and replacement

Wheel stud conversions

Assessed wheel spacers and appropriate fixings

Wheel-to-brake clearance assessment before ordering

Tyre-to-body clearance assessment

Steering-lock and suspension movement checks within practical workshop limits.

Existing wheel spacer and stud-conversion fitment checks